HSSE countersink set UGT Co5

HSSE countersink set UGT 3-piece DIN 335 C 90° version Co5 with unequal pitch

SET UGT HSSE DIN 335 C90° 3TLG

Item number:: 25202193
EAN:: 4007220420690

HSSE countersink set UGT 3-piece DIN 335 C 90° version Co5 with unequal pitch 1

HSSE countersink set UGT 3-piece DIN 335 C 90° version Co5 with unequal pitch 2

HSSE countersink set UGT 3-piece DIN 335 C 90° version Co5 with unequal pitch 3

HSSE countersink set UGT 3-piece DIN 335 C 90° version Co5 with unequal pitch 4

HSSE countersink set UGT 3-piece DIN 335 C 90° version Co5 with unequal pitch 5

Technical data Change variant

PFERD TOOLS worldwide

This set contains

HSSE Co5 conical and deburring countersink 90° dia. 6.3 mm shank dia. 5 mm DIN 335 C with unequal pitch

Item number: 25202179

EAN: 4007220420553
HSSE Co5 conical and deburring countersink 90° dia. 10.4 mm shank dia. 6 mm DIN 335 C with unequal pitch

Item number: 25202181

EAN: 4007220420577
HSSE Co5 conical and deburring countersink 90° dia. 16.5 mm shank dia. 10 mm DIN 335 C with unequal pitch

Item number: 25202184

EAN: 4007220420607

Technical information

HSSE countersink set UGT 3-piece DIN 335 C 90° version Co5 with unequal pitch

Contents tool diameter: 6.3 / 10.4 / 16.5
Number, content: 3 pcs.
PFERD TOOLS type: SET UGT HSSE DIN 335 C90° 3
Version: HSSE UGT
Packaging unit: 1 piece

Description

The sets include high-performance tools with a countersink angle of 90° for countersinking 90° screws for particularly tough and hard materials such as alloyed and high-strength steel and stainless steel (INOX). Conical countersinks with unequal pitch (UGT) are characterized by a specially developed geometry with wide flutes, which enables optimal chip removal and heat dissipation, smooth running and optimum results. Long tool life and temperature-resistant version due to Co content. The sturdy plastic box protects the tools against dirt and damage.

Advantages

Very high stock removal rate and optimum chip removal.
Burr-free results even at low cutting speeds.
Long tool life.
High workpiece surface quality.
Suitable for general use on almost any kind of material.
Very good temperature resistance due to Co content.
Smooth running.
Low countersinking force and a good surface quality.
Specially developed geometry with wide flutes for optimal chip removal and heat dissipation.

Recommendations for use

Particularly well suited to producing exact countersinks.
Use cutting oil or compressed air as a coolant/lubricant.

Downloads

HSSE countersink set UGT Co5

HSSE countersink set UGT 3-piece DIN 335 C 90° version Co5 with unequal pitch

SET UGT HSSE DIN 335 C90° 3TLG

This set contains

PFERD TOOLS Newsletter subscription