Solid tungsten carbide end mill dia. 6 mm, 4 blades, for roughing, 2xDC, chamfer 0.15 mm, AlCrN coating, HB shank, Universal

Technical information

Description

The solid tungsten carbide end mills are suitable for universal use on a variety of materials.

Mills with roughing for various applications, from roughing through to finishing and ramping.

Weldon shank HB in accordance with DIN 6535 with lateral driving surface.

Advantages

Universal use on the most important materials.
High productivity due to optimum stock removal rate.
State-of-the-art coatings.
Design with neck chip channel.
Optimum chip control thanks to roughing cut.
Unequal pitch and unequal helix angle for low-vibration work with smooth running.

Recommendations for use

Materials that can be worked: Aluminium; Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Bronze; Case-hardened steels; Cast iron; Cast steel; Cobalt-based alloys; Copper; Ductile cast iron; Ferrite (magnetic material); Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Hard non-ferrous metal; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Other non-ferrous metals; Roller-bearing and ball-bearing steels; Soft aluminium alloys; Soft non-ferrous metal; Soft titanium alloys (tensile strength 500 N/mm²); Stainless steel (INOX); Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Titanium; Titanium alloys; Tool steels; Tough aluminium alloys; White annealed cast iron (GTW, GJMW); Zinc

Downloads

Universal solid tungsten carbide end mill with four blades UCR4, chamfer corner design with roughing cut